<address id="pjpnx"></address>
      <sub id="pjpnx"></sub>

            <sub id="pjpnx"></sub>

            <thead id="pjpnx"></thead>

              <sub id="pjpnx"></sub>

              全国咨询热线

              13823613629

              当前所在位置 :首页 - News - Industry dynamics

              News

              联系我们  contact us

              手机:13823613629
              电话:0769-82937713
              q q : 425675360
              地址:东莞市常平镇桥沥村利氏工业区C10厂房一楼

              In the production of re-silicone rubber products
              发表时间: 2018-12-05     浏览次数: 1064次

              In the production of re-silicone rubber products, according to the difference of process and equipment, it can be divided into two main categories: moulding and injection moulding. Molding method: the process of directly loading rubber or pre-formed semi-finished products into the die cavity, then pressing on the machine and heating vulcanization at the same time, so as to obtain the parts of the product. Its production process is as follows: rubber - shear weighing or other pre-forming - filling die cavity - pressurization, vulcanization - starting pick-up - repairing flash - finished product quality inspection. The method of moulding is widely used because the moulding die structure and the equipment used are relatively simple and versatile.



              上一篇:In the production of re-silicone rubber products 下一篇:没有了


              展开
              粉嫩小仙女扒开自慰喷水